SAMSUNG OFFICESERV samsung technical support manual pdf TECHNICAL MANUAL Pdf Download. INSTALLING IN A RACK . INSTALLING ON A WALL .
PROCEDURE FOR CONNECTING POWER . 1 CONNECTING ADDITIONAL EQUIPMENT . 33 POWER UP PROCEDURES PRE-CHECK . 1 STARTING THE SYSTEM 8. 3 NUMBERING EXTENSIONS AND C. MP20 Board to LCP Board Figure 3.
43 Front View of the MGI Board Figure 3. 44 Front View of the MGI-16 Board Figure 3. 45 Front View of the OAS Figure 3. 46 Front View of the 4WLI Board Figure 3. 10 Adding an iDCS Keyset Daughterboard Module Figure 7. 11 Keyset Base Figure 7.
12 Installing KDB-DLI Daughterboard Figure 7. 13 Keyset Daughterboard Output Jack Figure 7. 14 Connecting Keyset Daughterboard to Keyset PCB Figure 7. Rated Output in the Case of Operation with AC Table 5.
4 Rated Output in the Case of Operation with DC Table 6. 1 Distance Between Stations and the System Table 7. 2 Specification for Wireless LAN Connection Table 7. Do not install in close proximity to a fire sprinkler or other sources of water. A dedicated commercial AC power outlet is required. Do not use extension cords. It should be noted that when the third wire ground becomes inferior it many prevent the digital data bus from canceling out noise.
PART 1 MAY 2010 1. 12V, and -56V to the system cabinet. Connect the ground to the ground lug behind the main cabinet. 1 Tools Required for Rack Installation 2. Attach the rack brackets to both sides of the rack and fasten the brackets firmly with the six screws.
Align the cabinet to the guardrails of the rack and slide the cabinet into the rack. 4 also apply to expansion cabinets. 6 Tools Required for Wall Installation 2. To install on the wall, loosen the two screws to approximately 2mm as shown in Figure 2. INSTALLATION TECHNICAL MANUAL PART 2 MAY 2010 2. External Grounding External grounding is required to prevent human injuries and system damage caused by lightning, static electricity, or voltage surge.